Erase Methods / Sanitation Standards

When using One Pass Zeros or One Pass Random, the number of passes is fixed and cannot be changed. When the write head passes through a sector, it writes only zeros or a series of random characters.

The write head passes over each sector three times. The first time with zeros (0x00), second time with 0xFF and the third time with random characters. There is one final pass to verify random characters by reading.

The write head passes over each sector, writing a Random character. On the next pass, writes the compliment of previously written character. Final pass is Random, proceeded by a verify.

The write head passes over each sector seven times (0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF, Random). There is one final pass to verify random characters by reading.

Baseline method overwrites disk's surface with just zeros (0x00). There is one final pass to verify random characters by reading.

Enhanced method - the write head passes over each sector three times. The first time with zeros (0x00), second time with 0xFF and the third time with random characters. There is one final pass to verify random characters by reading.

The write head passes over each sector two times. (0x00, Random). There is one final pass to verify random characters by reading.

The write head passes over each sector three times. The first time with 0xFF, second time with zeros (0x00) and the third time with random characters. There is one final pass to verify random characters by reading.

The write head passes over each sector three times. The first time with random characters, second time with zeros (0x00) and the third time with 0xFF. There is one final pass to verify random characters by reading.

RL method - the write head passes over each sector three times (0x01, 0x27FFFFFF, Random).

There is one final pass to verify random characters by reading.

The write head passes over each sector three times (0x00, 0xFF, Random). There is one final pass to verify random characters by reading.

The write head passes over each sector two times (Random, Random). There is one final pass to verify random characters by reading.

Supported three NIST 800-88 media sanitization standards:

1. The write head passes over each sector one time (0x00).

2. The write head passes over each sector one time (Random).

3. The write head passes over each sector three times (0x00, 0xFF, Random).

For details about this,the most secure data clearing standard, you can read the original article at the link below:http://csrc.nist.gov/publications/nistpubs/800-88/NISTSP800-88_with-errata.pdf

The write head passes over each sector seven times.

The write head passes over each sector seven times (0xFF, 0x00, Random, Random, Random, Random, Random). There is one final pass to verify random characters by reading.

The write head passes over each sector 35 times. For details about this, the most secure data clearing standard, you can read the original article at the link below:

http://www.cs.auckland.ac.nz/%7Epgut001/pubs/se%0Acure_del.html

The write head passes over each sector once with random characters. There is one final pass to verify random characters by reading.

User indicates the number of times the write head passes over each sector. Each overwriting pass is performed with a buffer containing random characters. Enables user to define any disk erase algorithm.